Our Blog

You’re in the band and you’re getting braces. Now what? If you are a member of the string or percussion sections, you can go back to rehearsal. You’re good to go. When your talents have seated you in the reed or brass sections, though, a little adjustment might be necessary to keep your instrument and your braces working in harmony.

If you play a wind instrument, you know the term embouchure—the way you position and use your lips, tongue, facial muscles, and teeth to produce the sound you want. Depending on the instrument you play, you might be completely unaffected when you get your braces, or you might need to develop a more comfortable embouchure to accommodate them.

Wires and Woodwinds?

If you play a wind instrument such as the flute or piccolo, you might find that your normal lip positioning or blowing angle is affected by your braces, but usually the adjustment time is fairly short. Reed instruments such as the saxophone, clarinet, oboe, and bassoon are considered some of the easiest to adjust to when you have braces, but even though the single and double reed mouthpieces don’t require as much pressure as brass instruments, there can still be an adjustment period. One thing you should look out for is more condensation in your mouthpiece or instrument—be sure to keep your instrument clean to keep your sound pure.

Brackets and Brass?

Brass instruments require mouthpiece pressure. This leaves your lips pressed between the mouthpiece and your braces. For this reason, many brass players have a more challenging adjustment when wearing braces. Smaller mouthpieces (trumpet, French horn) usually require more pressure than larger ones (tuba, trombone). It’s important to learn how to use technique to avoid cuts, irritation, and other injuries caused by the pressure of your braces against your lips. Learning to play with less pressure on the lips and more air control and breath support will help you to recover your tone and range of notes while protecting your lips and mouth.

How Can We Help?

Let Dr. Negaar Sagafi know if you play, or plan to play, a wind instrument. We might be able to offer some suggestions. For regular metal and ceramic braces, some musicians find extra wax is helpful in preventing lip and cheek injuries. There are brace guards available that can be applied over the braces to protect your lips and mouth if wax doesn’t do the trick.

There are also alternatives to regular bracket-and-wire braces, depending on your orthodontic needs, cost factors, and length of treatment. Invisalign® devices fit smoothly over your teeth and can even be removed when it is time to practice or play, as long as you get the necessary hours of wear in per day. In some cases, lingual braces, where the brackets and wires are placed behind the teeth, might be the best choice for you.

Finally, don’t forget to talk to your music instructor. Don’t be dismayed if you find the quality of your playing has been affected. Your teacher might have valuable suggestions for adjusting your embouchure, playing with less pressure on the lips, and developing better air and breath support. You might need to shorten your practice time at first, and there might be another period of adjustment after your braces come off.

Above all, take care of yourself! If something is poking your lip or cheek, call our Bethesda office immediately before it causes injury. It might be difficult at first, but finding an embouchure that works for your comfort and technique is worth it. And remember, these temporary fine-tunings will lead to a wonderful coda: skilled musicianship and a beautiful, healthy smile. Bravo!

The Importance of Facial Protection

Americans from all walks of life should mark April as National Facial Protection Month on their calendars. The American Association of Pediatric Dentistry, Academy for Sports Dentistry, American Academy of Pediatric Dentistry, and American Association of Oral and Maxillofacial Surgeons have combined forces to sponsor this annual campaign, which aims to educate and remind us of the importance of protecting our face and teeth against impacts and injuries.

Wearing a helmet can save your life and prevent devastating physical damage in a variety of situations, from playing football to riding a bicycle. According to the American Association of Oral and Maxillofacial Surgeons, helmets reduce the risk of various head injuries by as much as 85 percent. Whether helmet laws apply in your area or not, Dr. Negaar Sagafi and our team at Bethesda Orthodontics want you to make sure you and your loved ones wear helmets with the appropriate safety ratings for specific activities. (A sticker on or inside the helmet will usually indicate this rating.) Helmets can also help save your teeth if they come with an attached faceguard, an essential addition for football players and others involved in contact sports.

Preventing Dental Injuries

A mouthguard can protect you against a variety of dental injuries, such as cracked, broken, or knocked-out teeth. The American Dental Association states that mouthguards play an essential role in preventing up to 200,000 dental injuries each year, and many states mandate their use for sports activities such as football and hockey. The Academy for Sports Dentistry warns, however, that these mouthguards must be custom-fitted as precisely as possible to prove effective. Have a professional-quality mouthguard molded and fitted by our team at Bethesda Orthodontics for better protection than a generic store-bought or “boil-and-bite” variety can offer. These cheaper versions tend to wear out quickly, interfere with proper breathing, and provide uneven degrees of cushion against impacts. Always have a fresh mouthguard fitted for each new sports season.

Choose the right combination of helmet, faceguard, and mouthguard to protect your teeth and face this April, and tell your friends to do the same! To learn more about mouthguards, or to schedule an appointment with Dr. Negaar Sagafi, please give us a call at our convenient Bethesda office!

Choosing clear aligners was a great decision on your part! Straight teeth and a healthy bite? Subtle, almost invisible aligners? 3D technology custom-designed just for you? All the positives we’ve come to expect from your choice of orthodontic treatment.

So, don’t sabotage your good work! Here are five negative habits that will prevent you from getting the most out of your aligners:

1. Don’t forget to keep them clean

One of the reasons you chose clear aligners is because they are nearly invisible. But careless cleaning habits can leave them discolored, scratched, or cloudy. Soaking in colored mouthwash can stain aligners. Using abrasive cleaning products or brushing with a heavy hand can cause scratches. And failing to keep aligners clean can lead to a buildup of cloudy plaque. Talk to us! We know all the best products and practices to keep your aligners their most sanitary—and most invisible.

2. Don’t eat with your aligners in place

Aligners are simply not meant to be used while you eat. Chewing puts too much stress and pressure on them, and can lead to aligner damage and even breakage. Because you will be wearing your aligners for most of the day, planning ahead for your meals is key. One bonus: it’s a great way to eliminate unconscious snacking.

3. Don’t let foods or drinks stain your aligners

It’s great that you take your aligners out to eat, but do you remember to brush before you replace them? Foods like spaghetti sauce and blueberries that stick to your enamel can stain your aligners. And it’s always best to remove your aligners before drinking a beverage. If a drink can stain your teeth, it can stain your aligners. Red wines, dark juices, colas, and, of course, coffee and tea can cause discoloration. Another thing to consider? Food particles in the trays can not only stain your aligners (and your enamel), but keep your teeth in contact with the acids and sugars that lead to cavities.

4. Don’t run hot

Aligners are formed using heat, so it makes sense that heat can de-form them as well. Drinking hot beverages with your aligners in place can change their shape—and even subtle changes will affect your progress. Since warped aligners might have to be replaced, save the piping hot beverages for those times you’re not wearing aligners. It’s best not to clean them with very hot water as well.

5. Don’t forget to wear them

Aligners need to be worn approximately 20-22 hours each day. If you’re not putting in the required time, you’re delaying your progress. If you’re having trouble with scheduling meals or activities, talk to Dr. Negaar Sagafi when you visit our Bethesda office. We have suggestions.

But let’s not just dwell on the negatives. We like to focus on the positive, too, so here’s the one item on your “Do List” that will absolutely make your aligner experience the best it can be:

Do follow our recommendations!

Clean your aligners with the proper tools and products—and clean your teeth and aligners after every meal and snack. Remember that water is the only guaranteed problem-free beverage. Don’t expose aligners to heat or eat with them in place, because they can be warped or damaged. And be sure to wear them as long as you need to each day—this will keep your treatment on track and on schedule.

Enjoying a future filled with beautiful, healthy smiles? That’s not just a positive—it’s a happily-ever-after!

Modern orthodontic technology has changed the way you wear braces. Brackets are smaller and come in a variety of shapes and colors. Wires are more efficient. Clear aligners can eliminate the need for brackets and wires altogether. And your high-tech advantages don’t stop there—today’s digital X-rays make creating your treatment plan even more convenient and efficient.

Why Are X-rays Necessary?

Beautifully aligned teeth and a healthy bite are the visible result of your orthodontic work, but there’s a lot going on above and below the surface that needs to be discovered and taken into account before your treatment even begins. X-rays help Dr. Negaar Sagafi evaluate:

• The size, shape, and position of your teeth, including impacted teeth and wisdom teeth
• The size, position, and health of your roots throughout treatment
• The size and shape of your jaw bones, and how they affect your teeth alignment and bite
• Your progress during different phases of treatment
• The most effective type of retainer for protecting your beautiful smile after treatment.

How Do X-rays Work?

Traditional X-rays, or radiographs, make use of film just like traditional cameras. When you have an intraoral X-ray, for example, the film is sealed in a moisture- and light-proof packet, and placed inside the mouth to capture images of specific teeth and the bone around them.

The X-ray machine is aligned precisely with the film and an exposure is taken. The image at this point is latent, and won’t show on the film, because, just like photo film, traditional radiographs need to be chemically processed before they produce a visible image.

Digital technology, on the other hand, uses an electronic sensor instead of film. For an intraoral digital X-ray, a small sensor is positioned in the mouth just like a film. When the X-ray is taken, a digital image capture device produces an image which is formed by a matrix of pixels instead of a photo-like film exposure. This format allows the image to be sent directly to a computer for immediate display without requiring processing.

Even though these methods seem very similar, digital X-rays offer some significant advantages over traditional films. Let’s look at how they compare, more or less.

• More Diagnostic Advantages

A traditional X-ray is a fixed image. It cannot be modified or enhanced. Here the digital X-ray offers a clear advantage in evaluating your teeth and the bone structure surrounding them.

Just as you can enlarge certain types of images on your computer without blurring or losing detail, a digital X-ray uses computer software to magnify images while keeping their details sharp. They can also be enhanced through brightness and contrast applications to make details stand out even more.

There is even digital subtraction radiography software available that can be used to compare recent images to older ones, removing (“subtracting”) all the similarities in the two images to display only the changes in the two—even small changes—that have taken place over time.

• Less Exposure to Radiation

Modern technology means traditional X-rays expose patients to less radiation than ever before, but digital X-rays have significant advantages here as well. Radiation exposure can be reduced by an additional 10%, 20%, or more with a digital radiograph.

And while all types of dental X-rays expose you to very little radiation, it’s always best to reduce exposure whenever possible.

• More Convenient for Sharing and Transmitting

If you need to share your X-rays with another dentist or physician, digital technology allows you to simply have them e-mailed to another office or multiple offices. You no longer need to worry about preserving physical copies, either.

• Less Waste

Unlike traditional X-rays, digital X-rays don’t need to be processed, so you save time in the office. And while the processing time is not significant (usually several minutes), if you need to repeat some X-rays for a clearer picture, or require different images for several teeth, this time can add up.

Digital X-rays are also more eco-friendly.  The fact that they don’t need to be developed means that the chemicals used to process traditional films are no longer necessary—which also means that there is no need to dispose of chemical waste products afterward.

Our goal is to provide you with the safest, most efficient, and most effective treatment possible. Digital X-rays are an important tool for orthodontists, helping us to provide you with the best treatment plan possible. If you have any questions about digital X-ray technology, contact our Bethesda office. We’re happy to explain the science—and the benefits—behind this high-tech diagnostic tool.